EVGA Supernova 1300 G2, User Manual, Page: 3 / 5

4 5
1300W GOLD Power Supply User Manual 1300W GOLD Power Supply User Manual
4. Connect the 8-pin EPS12V cable to the motherboard.
5. Connect the 6/8-pin PCIe cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-pin PCIe cable into a
6-pin connector without first detaching the two extra pins.
6. Connect the SATA cables to your power supply and drives
(hard drives, solid state drives, optical drives).
7. Connect the peripheral “molex” connectors to the power
supply and your fans and other devices.
8. Connect the AC power cord to your power supply and to
the wall, and turn the power switch to the ON position.
STABLE POWER
The SuperNOVA Gold series has outstanding electrical performance with
ultra stable voltage
and extremely
clean
outputs . This can help you achieve the highest possible overclock, or just the most stability and reliability. The
SuperNOVA Gold series also has high efficiency up to 90% and is 80PLUS GOLD certified.
THE BEST PROTECTION
The SuperNOVA Gold series comes equipped with the most comprehensive protection set possible, including Over
Voltage Protection (
OVP ), Under Voltage Protection ( UVP ), Over Power Protection ( OPP ), Short Circuit Protection
( SCP ), and Over Current Protection ( OCP ). This product is also covered by an exceptional 10-year warranty and
EVGA’s legendary customer service and support.
SUPERIOR BUILD QUALITY
The SuperNOVA Gold series is built to the highest standards, using Japanese capacitors rated at 105 degrees
Celsius and high quality brand-name semiconductor components for the highest performance and reliability.
MODULAR DESIGN
The SuperNOVA Gold series is designed with the enthusiast in mind, with fully modular cables to maximize airflow
and keep your system looking slick and clean.
Installation
1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the
power supply into your computer.
NOTE:
It is
recommended to install the power supply with the fan
facing down. However, if your case places the power
supply at the bottom of the case and there are no
ventilation holes there, it may be best to install the power
supply with the fan facing up for greater efficiency and
reliability.
3. Connect the 24-pin ATX cable to the motherboard.
Features