8
3800 MHz (3.8 GHz). Overclocking will change the values listed here but the clocks
will still vary.
CPU Package Temp: This displays the temperature in Celsius of the CPU socket
which the probe is attached to, the individual Core temp will vary from this as well
and depending on ambient temps and load level can vary from below 20c up to
90c.
CPU Voltage: this monitors the current VCore of the CPU. This will vary on its own,
however in override mode it can be set to a static value. CPU voltage is read in
millivolts, so 1000mv is 1.0 volts.
Fan RPM: This is the speed at which the cooling fan runs. This will vary based off of
temperature of internal components, the fan curve is set from the factory.
Memory clock: This is the frequency your system RAM is running at. The default
speed is 2666MHz
Memory Voltage: This read the voltage the memory is currently running at. This
will typically be between 1.20 and 1.35 volts.
System temp: This is the temp of the PCH (chipset) on the motherboard. This will
typically be lower than the CPU temp.
