EVGA NEX1500 classified, User Manual, Page: 3 / 6

4 5
1500W Power Supply User Manual 1500W Power Supply User Manual
3. Connect the 24-pin ATX cable to the power supply and
the motherboard.
4. Connect the 8-pin EPS12V cable(s) to the power supply
and the motherboard. Connect the 6/8-pin PCIe cables to
the power supply and your graphics card(s).
NOTE: Do not
attempt to plug an 8-pin PCIe cable into a 6-pin connector
without first detaching the two extra pins.
5. Connect the SATA cables to your power supply and drives
(hard drives, solid state drives, optical drives).
6. Connect the peripheral “molex” connectors to the power
supply and your fans and other devices.
7. Connect the provided EVGA USB cable to your
power supply and your motherboard’s USB header.
EVGA SUPERNOVA
The NEX-1500 is compatible with the unique and exclusive EVGA SuperNOVA software that lets you monitor and
control your power supply from your desktop. Monitor and adjust voltage, change fan speed, and even switch
between single and multiple rails!
TOP TIER PERFORMANCE
The NEX-1500 has class-defining performance with ultra stable voltage and extremely clean outputs . This can
help you achieve the highest possible overclock, or just the most stability and reliability. The NEX-1500 also has
high efficiency
up to 90% at 50 degrees Celsius and is 80PLUS Gold certified.
THE BEST PROTECTION
The NEX-1500 comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (
OVP ), Under Voltage Protection ( UVP ), Over Power Protection ( OPP ), Short Circuit Protection ( SCP ),
Over Temperature Protection (
OTP
), and Over Current Protection (
OCP
). This product is also covered by our
industry-leading five year warranty .
BEST BUILD QUALITY
The NEX-1500 is built to the highest standards, using
Japanese capacitors
rated at 105 degrees Celsius and high
quality brand-name semiconductor components for the highest performance and reliability.
FULLY MODULAR CABLES
The NEX-1500 is designed with the enthusiast in mind with fully modular.
Installation
1. Remove the power supply from its packaging.
2. Use the provided screws to install the power supply into
your computer case.
NOTE: It is recommended to install
the power supply with the fan facing down. However,
if your case places the power supply at the bottom of the
case and there are no ventilation holes there, it may be
best to install the power supply with the fan facing up for
greater efficiency and reliability.
Features