15
FIRMWARE OUT OF SYNC:
If a firmware warning is ever shown, indicating that your firmware does not match your driver: First verify
you have a Killer Xeno installed (you may have removed it or knocked it loose from the PCIe slot), and if it
is installed and the lights are working, and clicking “yes” to the prompt has not solved the issue, navigate
to C:\Program Files\Bigfoot Networks\Killer Driver and run the file KillerFlash.exe (You will need to reboot
before the new firmware takes effect).
Technical Support:
EVGA is dedicated to supporting our products. If you need to contact Customer Service, please have
your system configuration ready, as well as your model number and serial number ready. You will need to
register your product before a support technician can assist you. You may register your product online
at:
http://evga.com/register
, or when you call for support, a staff member will register you.
• Hours of Operation: 24/7 Technical Phone Support
• Phone Support: (888) 880-EVGA (3842)
• Fax Support: (714) 528-4501
• Tech Support Web Site:
http://evga.com/support
Warranty Information:
For warranty information on this product, please visit:
http://evga.com/warranty/
.
As a valued EVGA
customer; you will be sure to receive a warranty that will fit your needs.
EVGA Advanced RMA (EAR) Program:
The EVGA Advanced RMA (EAR) Program is a program to protect yourself and your product in the case
of product failure. For more details please visit:
http://evga.com/EAR
EVGA Online Community:
To visit the EVGA community message boards, please visit:
http://forums.evga.com
EVGA FAQ:
To search our knowledge base and product FAQ please visit
http://evga.com/FAQ
EVGA Gaming:
If you live to game, this is the place for you! We have the best tournaments, prizes and game servers,
visit
http://evga.com/gaming
FOLDING@EVGA:
Distributed computing for the greater good. Did you know you could turn your graphics card into a shared
super computer? Visit
http://evga.com/folding
$1k Sponsorships for every 200 posts. Come show off your rig and join in on one of the biggest things
happening at EVGA, visit
http://modsrigs.com
MODS RIGS:
FCC Compliance Information
This device complies with FCC Riles Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are deigned to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and signal source. Connect the equipment to an outlet on a circuit different from that
to which the signal source is connected.
Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of the monitor to the
graphics card is required to ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
CE Compliance Information
EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device EN 50081-14, Generic Emissions Standard for
Residential, Commercial and Light Industrial Products (EN 55022/CISPR 22, Limits and Methods of measurement of Radio).
(EN 5502
2/CISPR 22, Limits and Method of Measurement of Radio Interference Characteristics Information Technology
Equipment) Warning: This is a Class B product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measure. EN 50082-1, Generic Immunity Standard for Residential,
Commercial and Light Industrial Products (IEC 801-2, IEC 801-3, IEC 801-4)
Compliance Information
Trademark Information
2000-2009 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. Bigfoot Networks, the Bigfoot Networks
Logo, Killer and the Killer logo are trademarks of Bigfoot Networks, Inc. All brands, products and companies are trademarks or registered
trademarks of their respective companies. EVGA Corp. reserves the right to change product specifications without prior notice
.
16
