450W / 500W / 600W Bronze
Power Supply User Manual
Introduction: Premium Power
The EVGA BA power supplies offer an affordable and stylish
alternative for those looking to build a safe and efficient system.
80PLUS
®
Certified Bronze means the BA power supplies are at
least 82% efficient under a standard load, and are built to maintain
low electrical ripple and noise during operation. With increased
voltage stability on the 3.3V and 5V rails, Active PFC, and a full
suite of protections, the EVGA BA power supplies should be at
the top of your list to power your next system build.
Safety Information
WARNING:
This unit has no user-serviceable parts inside.
Opening the casing presents a risk of electrocution and will void
the products warranty. EVGA will not be responsible for any
result of improper use, including but not limited to, any use of the
product’s outside of its intended purpose or use inconsistent with
the warranty terms available online. (Warranty information is
available at
www.evga.com/support/warranty
and this manual is
available at
www.evga.com/manuals
).
Features
STABLE POWER
The 450 BA/500 BA/600 BA has outstanding electrical performance with
ultra stable voltage
and
extremely clean power output
. This can
help you achieve the highest possible overclock (optional) and
provide the most stable and reliable power to all components.
The 450 BA/500 BA/600 BA also provides
up to 85% (115VAC) / 85%
(220VAC~240VAC)
efficiency and is
80 PLUS
®
BRONZE
certified.
TOP QUALITY PROTECTIONS
The 450 BA/500 BA/600 BA comes equipped with the most
comprehensive protection set possible, including Over Voltage
Protection (
OVP
), Under Voltage Protection (
UVP
), Over Power
Protection (
OPP
), Short Circuit Protection (
SCP
), Over Temperature
Protection (
OTP
), and Over Current Protection (
OCP
). This product
is also covered by a
3-year warranty
and EVGA’s legendary customer
service and support.
Installation
8. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
7. Connect the peripheral “Molex” 4-pin connectors for fans,
pumps, legacy components and other devices/adapters.
6. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
5. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
NOTE:
Do not attempt to plug an 8-pin PCI-E cable into a 6-pin
connector without first detaching the two extra pins.
4. Connect the 4+4-pin EPS12V cable to the motherboard.
3. Connect the 20+4-pin ATX cable to the motherboard.
2. Use the screws provided with your case to install the power
supply into your computer.
NOTE:
It is recommended to install
the power supply with the fan facing down. However, if your
case places the power supply at the bottom of the case and
there are no ventilation holes available, it may be best to install
the power supply with the fan facing up for greater efficiency
and reliability.
1. Remove the power supply from its packaging.
English
Summary of Contents for BRONZE 450BA
Page 1: ......
