EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 13
To install a CPU, locate the LGA775 socket and open it by first pulling the lever
sideways away from the socket then upward to a 90-degree angle. Insert the
CPU with the correct orientation as shown on the previous page. The notched
corner should point toward the end of the lever. Because the CPU has a corner
pin for two of the four corners, the CPU will only fit in the orientation as shown.
When you put the CPU into the LGA775 socket, no force is required to insert
the CPU.
2-4
Install Memory
This motherboard provides
four
240-pin DDR2 DUAL INLINE MEMORY
MODULES (DIMM) slots for DDR2 memory expansion available from minimum
memory size of 128MB to maximum memory size of 4.0GB DDR2 SDRAM.
Generally, installing DDR2 SDRAM modules to your motherboard is very
easy, you can refer to the following page to see what a 240-Pin DDR2 400/
DDR2 533/DDR2 667 DDR2 SDRAM module looks like.
Bank
184-Pin DIMM
PCS
Total Memory
Bank 0, 1 (DIMM1)
DDR2 400/DDR2 533/DDR2 667
X1
128MB~1.0GB
Bank 2, 3 (DIMM2)
DDR2 400/DDR2 533/DDR2 667
X1
128MB~1.0GB
Bank 4, 5 (DIMM3)
DDR2 400/DDR2 533/DDR2 667
X1
128MB~1.0GB
Bank 6,7 (DIMM4)
DDR2 400/DDR2 533/DDR2 667
X1
128MB~1.0GB
Total System
Memory
(Max. 4.0GB)
4
128MB~4.0GB
For Dual Channel Memory
Dual channel only enables when 2 DIMM modules are inserted into either
DIMM1 and DIMM4 or DIMM 2 and DIMM4.
DIMM1 & DIMM3, or DIMM2 & DIMM4 must be the same type, same size,
and same frequency for dual channel to function.
Recommended DIMM Module Combinations
1.
One DIMM Module — Plug in DIMM1
2.
Two DIMM Modules — Plug in DIMM1 and DIMM3 for Dual Channel
