EVGA 132-CK-NF79, User Manual

Page: 47 / 127

nForce 790i Ultra SLI Motherboard
EVGA Corporation
36
January 11, 2008 | DU-03751-001_v01
Press
Enter
to auto-detect IDE and SATA channels in the system. Once the
channel is detected, the values for Capacity, Cylinder, Heads, Precomp,
Landing Zone, and Sector are automatically filled in.
‰
None
There is no HDD installed or set.
‰
Auto
The system can auto-detect the hard disk when booting up.
‰
Manual
When you set the channel to
[Manual]
and change
Access Mode
to
[CHS]
, you can then enter the number of cylinders, heads, Precomp,
landing zone, and sector. You can manually enter the values or you can
press
Enter
to display a window that tells you the min and max values.
The BIOS supports the following HDD
Access Modes:
¾ CHS
For HDD less than 528 MB.
¾
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
¾
Large
For HDD greater than 528 MB but not supporting LBA.
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave
[Manual}
Access Mode [CHS]
Capacity 0 MB
Cylinder
..... 0
Head [ 0]
Precomp [ 0]
Landing Zone [ 0]
Sector [ 0]
Cylinder
Min= 0
Max=65535
Key in a DEC number :
:Move ENTER:Accept ESC:Abort
Press ENTER to display sub-
menu
t b ll