Before You Begin…
Parts NOT in the Kit
This kit contains all the hardware necessary to install and connect your new EVGA
e-7050/610i GPU motherboard with integrated GeForce graphics processing. However, it
does not contain the following items that must be purchased separately to make the
motherboard fully functional.
Intel microprocessor:
Cooling fan and heat sink for the microprocessor
System memory support
Hard Disk Drive(s)
Operating System
Power Supply
Graphics Card
EVGA assumes you have purchased all necessary parts needed to allow for proper system
functionality.
Motherboard Specifications
Size
mATX form factor.
Microprocessor support
Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo, Pentium EE, Pentium, and
Celeron. (The e-7050/610i supports up to 1066MHz FSB CPU’s)
Operating systems
Supports Windows XP and Windows Vista.
Contains an NVIDIA nForce MCP and integrated GeForce graphics
System Memory
•
Single-channel DDR2 667/533
•
Supports up to 4 GB DDR2 memory (2GB x 2)
USB 2.0 Ports
•
Supports hot plug
•
Up to eight (4 onboard) USB 2.0 ports
•
Supports USB 2.0 protocol up to 480Mbps transmission rate
