6
SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL
PN100
PN100CP
PN100EPAL
PN130
PN130B
HEIGHT
16.4" (417 mm)
18.4 (467 mm)
WIDTH
6.1" (156 mm)
6.1" (156 mm)
LENGTH
13.3" (338 mm)
13.3" (338 mm)
WEIGHT
12.1 lbs. (5.5 kg)
13.2 lbs. (6.0 kg)
RECOMMENDED
OPERATING PRESSURE
70 to 120 psi (5 to 8 bar)
LOADING CAPACITY
200~300
215
120~225
AIR CONSUMPTION at 90 psi
(6 bar) pressure
0.068
ft
3
(1.92 liter/cycle)
0.070
ft
3
(1.98 liter/cycle)
FASTENER SPECIFICATIONS
MODEL
PN100
PN100CP
PN100EPAL
PN130
PN130B
NAIL LENGTH
2-1/2"
-
4"
(65 - 100 mm)
2-3/4” - 3-1/2”
(70 - 90 mm)
3-1/2" - 5-1/8"
(90 - 130 mm)
SHANK DIAMETER
.099" - .131"
(2.5 - 3.3 mm)
.138”
(3.5 mm)
.131" - .150"
(3.3 - 3.8 mm)
HEAD DIAMETER
.256" - .295"
(6.5 - 7.5 mm)
.339”
(8.6 mm)
.295" - .338"
(7.5 – 8.6 mm)
SHANK TYPE
Smooth, Ring, Screw
COLLATION
15
°
Wire
TOOL AIR FITTING
This tool uses a 3/8-18 N.P.T. male plug. The inside diameter should be .280” (7 mm) or larger. The fitting must be
capable of discharging tool air pressure when disconnected from the air supply.
OPERATING PRESSURE
70 TO 120 psi (5 to 8 kg/cm
2
). Select the operating pressure within this range for best fastener performance.
DO
NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
TECHNICAL DATA
AIR CONSUMPTION
The tools require
P100(B/CP), PN100EPAL: 6.8 cfm (3.2 liter/second)
PN130(B): 7.0 cfm (3.3 liter/second)
of free air to operate at the rate of 100 nails per minute, at 90 psi (6.0 kg/cm2). Take the actual rate at which the tool
will be run to determine the amount of air required. For instance, if your fastener usage averages 50 nails per minute,
you need 50% of the tool air consumption in running at 100 nails per minute.
NOISE
A-weighted single-event sound power level LWA, 1s:
PN100(B/CP), PN100EPAL: 112.3 dBA
PN130(B): 111.2 dBA
