12
All rights reserved Evervue. Information is subjected to change without prior notice.
MEMORIZING THE CHANNELS
Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the
available channels are memorized, use CH+/- to scan the channels.
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is
connected to the unit. (i.e. an antenna or cable system)
Press MENU to display the menu main page.
1.
Press CH+/- repeatedly to select Channel page.
2.
Press ENTER or VOL+/- to access the submenu.
3.
Press CH+/- to select Source item.
4.
Press ENTER or VOL+/- to toggle between Antenna or Cable. If you are connected to an antenna, please select
5.
Antenna. If you connect cable, please select cable.
Selecting the Signal Source
Repeat steps 1-3 in [Selecting the Signal Source] to access Channel page. The auto Searching item will be high-
1.
lighted automatically.
Press ENTER or VOL+/- to store channels in memory automatically. The unit will begin memorizing all the avail-
2.
able channels. During the process of the Auto Search, you can press Menu to exit.
Storing Channels in Memory Automatically
Repeat steps 1-3 in [Selecting the Signal Source] to access Channel page.
1.
Press CH+/- repeatedly to select AFC item.
2.
Press ENTER or VOL +/- to select On or Off. When the AFC is set to On, the unit will automatically tune the
3.
program frequency to provide the best possible picture and sound.
Setting Auto Frequency Control (AFC)
Repeat steps 1-3 in [Selecting the Signal Source] to access Channel page.
1.
Press CH+/- repeatedly to select Fine Tune item.
2.
Press VOL +/- to fine tune till the best possible picture and sound are obtained.
3.
NOTE: If you fine tune manually, the AFC will be turned off automatically.
Manual Fine Tuning
Use number buttons to directly select a channel that will be added or erased.
1.
Repeat steps 1-3 in [Selecting the Signal Source] to access Channel page.
2.
Press CH+/- repeatedly to select Channel Skip item.
3.
Press ENTER or VOL =/- to select On or Off. When th item is set to on, the selected channel will be erased. When
4.
the item is set to off, the selected channel will be added. The erased channels can not be selected by using the
CH+/- buttons unless you use number buttons to input channel number directly.
Adding and Erasing Channels
