MViP-II
IP Based Multi-Image Display & Monitoring Solution
Page - 50
Revision 1.2
Video Loss:
This Fault is triggered when no video frames have been decoded for error duration amount
of time.
Subtitle Loss:
This fault is triggered when no DVB or SCTE-27 subtitles have been decoded for error
duration amount of seconds.
Teletext Loss:
This fault is triggered when no Teletext Subtitles have been decoded for error duration
amount of seconds.
6.3.1.5.
Closed Captioning – Fault Settings
Figure
6-33 : Setting the fault parameters for Video Monitoring
Loss of CC1 – CC4:
These fields allow the user to enable or disable faults for closed captioning.
Error Duration:
This field allows the user to set the amount of time of an error state condition to occur
before a fault is set.
Reset Duration:
This field allows the user to set the amount of time for closed captioning to be presented
before the fault condition is reset.
Loss of 708 Services 1-16:
These fields allow the user to enable or disable faults for captioning.
Error Duration:
This field allows the user to set the amount of time of an error state condition to occur
before a fault is set.
Reset Duration:
This field allows the user to set the amount of time for subtitles to be presented before
the fault condition is reset.
6.3.1.6.
Program Monitoring Settings
This section is used to Set Error duration, Reset Duration, Threshold to monitor Program Bit rate
Low/High. Set parameters of Error duration, Reset Duration to monitor PID loss.
6.3.1.7.
Metadata Monitoring Settings
This section is used to set Error duration, Reset Duration to monitor ID3 Metadata Loss.
