evertz MIO-CCE-4K/3G User Manual Download

Page: 15 / 90

MIO–CCE–4K/3G

SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming

Revision 1.0

Page - 3

INSTALLATION

2.1. REAR PANEL

Figure 2-1 provides the user with an illustration of the MIO–CCE–4K/3G module. The MIO-CCE-4K/3G is a

dual-slot module and will require two available slots in the Scorpion frame.

Figure 2-1: MIO-CCE-4K/3G Module I/O

2.1.1.

Program Video Inputs (12G/3G/HD/SDI Input1-4)

The SDI Inputs 1-4 are BNCs compatible with SMPTE ST 2081 (12G-SDI), SMPTE ST 424M (3G), SMPTE

ST 292M (1.5G), SMPTE ST 259M (270Mb). These inputs support upstream SDI video and upstream SDI

video with caption information.

2.1.2.

Program Video Outputs (12G/3G/HD/SDI OUT 1-4)

The SDI Outputs 1-4 are BNCs compatible with SMPTE ST 2081 (12G-SDI), SMPTE ST 424M (3G),

SMPTE ST 292M (1.5G), SMPTE ST 259M (270Mb).

Summary of Contents for MIO-CCE-4K/3G



























































































Search results

Summary of Contents for MIO-CCE-4K/3G

Reviews:

Related manuals for MIO-CCE-4K/3G

Brands by name

Popular brands

evertz MIO-CCE-4K/3G, User Manual

Search results

Summary of Contents for MIO-CCE-4K/3G

Reviews:

Related manuals for MIO-CCE-4K/3G

Brands by name

Popular brands