evertz EQT Series, System Manual

Page: 74 / 76

EQT Router User Manual
Page 60
Revision 1.9.1
Figure 7-5: Run Window for FTP Access
3. Enter the commands below in the FTP window. If all goes well you will see the file transfer via
Ethernet to the EQT and a Transfer Complete message will display.
put C:\temp\LATEST_FIRMWARE.bin
(replace LATEST_FIRMWARE with the name of the file)
quit
7.3. UPGRADING FROM OLDER VERSIONS OF FIRMWARE
The following steps are used to upgrade any of the standard EQT routers: EQT-3232-H, EQT-3232-3G,
EQT-3232-3G-F, EQT-1616-H, EQT-1616-3G, EQT-1604-H, EQT-1604-3G-CS, EQT-3224-3G and
EQT-3204-3G-CS that have a firmware version prior to 1.0 build 001. This firmware was released
before the standalone web server was implemented to allow easier upgrades. Once upgraded to a
recent firmware version, future upgrades can be done from a standard web browser.
4. Copy the latest IMG file to any directory on your computer. (C:\temp)
5. FTP into the EQT using the following command. Replace 192.168.8.9 with the unique IP of
your device as shown in Figure 7-6. Login as user root and Password evertz .
Figure 7-6: Run Window for FTP Access