Model 8010TM SDI Time Code Master Manual
OPERATION
Revision 1.5.1
Page 3-33
GPI1 ASSIGNMENT
The following descriptions indicate how the GPI will function with each
setting.
Ltc active
Provides an alternate method of selecting the LTC
reader as the active reader. The LTC reader is selected by a
high to low transition on this input, and deselected by a low to
high transition.
Vitc active
Provides an alternate method of selecting the VITC
reader as the active reader. The VITC reader is selected by a
high to low transition on this input, and deselected by a low to
high transition.
Gen hold
Provides an alternate method of selecting the Generator
Hold function. The generator Hold function is selected by a high
to low transition on this input, and deselected by a low to high
transition.
Gen set
Provides an alternate method of selecting the Generator
Set function. The generator Set function is selected by a high to
low transition on this input, and deselected by a low to high
transition. When this input is closed to ground the last entered
time value is entered into the Generator again.
Gpi1 = ltc active
Gpi1 = vitc active
Gpi1 = gen hold
Gpi1 = gen set
3.7.9.3. Assigning the Functions of the General Purpose Outputs
When the
GEN MODE
is not set to
time rctl
there are two general purpose outputs. The functions of
these outputs are set using the
GPO1 ASSIGNMENT
and
GPO2 ASSIGNMENT
menu items. The
operation of both menus is identical so only the GPO1 Assignment menu will be shown.
Summary of Contents for 8010TM
