7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Revision 1.0
Page - 57
6.4.
FIRMWARE UPGRADE USING VISTALINK
®
Upgrading the firmware using VistaLINK
®
can be accomplished using the control port of the
7882J2KX-IPASI or using the 7800FC frame controller. Both methods use the same procedure.
Ensure that the 7882J2KX-IPASI is running the latest firmware, to check this simply right click on the
cards address in VLPro Client and select
Version Information
as shown in Figure 6-6.
Figure
6-6 : VistaLINK
®
- Selecting Version Information
Once
Version Information
is selected, Figure 6-7 will appear and the module will be able to be selected
for upgrade.
•
Open hardware tree and select card to be upgraded.
•
Check mark card to be upgraded.