evertz 7881TSM-IP, User Manual

Page: 53 / 64

7881TSM-IP
User Manual
Version 1.0
Page - 43
TEMPLATE CHECK
The template check tab is a user configurable tab for validating the compliancy of the TS input against the
template parameters entered.
Figure 7-7 - VistaLINK PRO Template Check Tab
7.7.1. GLOBAL CONTROL
Min Bitrate:
Enter a decimal value corresponding to the absolute lowest bitrate expected for the whole stream;
an alarm condition will be caused if the stream rate should drop below this value.
Max Bitrate:
Enter a decimal value corresponding to the highest bitrate expected for the whole stream; an alarm
condition will be caused if the stream rate should exceed this value.
7.7.2. MISC. TEMPLATE
TS ID Expected:
Enter the value for the Transport Stream ID expected, enter zero to disable the test.

Note: It is not possible to enter the TS ID as a Hex value.
Num PIDs Expected: Enter here the number of PIDs expected in the stream (including the null packets if any),
enter zero to disable the test.