7700/7800 MultiFrame
Manual
7880IP-ASI-IP IP/ASI/IP Converter
Page 16
Revision 1.1
4.2.2. ASI Input Monitor Section
•
ASI Input:
This field displays the standard of the ASI signal.
•
ASI Port Status:
This field displays whether the status of the ASI signal is
Active
or
Inactive
.
•
ASI TS Bitrate:
This field displays the overall bit rate of the incoming ASI signal.
•
ASI Useful Bitrate:
This field displays the payload total bit rate.
•
ASI Null Packet Bitrate:
This field displays the null packets bit rate
•
ASI Sync Lost:
This counter increments every time the sync bite is not detected. The actual
synchronization of the TS depends on the number of correct sync bytes necessary for the device to
synchronize; two or more consecutive corrupted sync bytes indicate sync loss.
•
ASI Continuity Count Errors:
A continuity counter error is indicated if the value of the continuity
counter field within a payload packet is not incremented by one, and the packet is not a valid
duplicate or discontinuity packet.
•
ASI Input Packet Size:
This field displays the input packet size: MPEG2 TS Packet 188/204 byte
•
Clear ASI Stats:
The ASI monitoring fields can be reset at any time by selecting the “
Clear ASI
Stats
” button. To apply the new setting, click the
Apply
button and the statistics will be reset and
begin counting from zero again.
