7700 MultiFrame Manual
7736CEM Composite Encoder with Monitoring
Revision 1.5
Page - 5
*Grey background indicates un-implemented or un-tested features
2.
INSTALLATION
The 7736CEM modules come with a companion rear plate and occupy one or two slots in the 7700FR
frame.
Figure 2-1 shows a picture of each of the rear panels. For information on mounting the rear plate and
inserting the module into the frame see the 7700FR chapter section 3.
The 7736CEM cards must be inserted into slots with the correct rear panel. Some cards have physical
differences and some have functional differences and the associated labels will be misleading.
Figure 2-1: 7736CEM Rear Panels
2.1.
VIDEO IN AND OUT
Connect a source of component serial digital (525 or 625 line) video to the top BNC labeled SDI IN. A re-
clocked version of the input video is available on the SDI OUT BNC. Connect a reference black signal to
the REF IN BNC if frame synchronization is desired (+S only). Broadcast quality composite analog video
is available on the ANALOG OUT BNCs. Monitoring quality video with text and audio bar graphs are
available on the MON OUT output BNC. If the card is not present or the power is off, there will be nothing
on any of the outputs.
