5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 50
Revision 1.0
UPGRADE PROCEDURES
6.2.2. Firmware Upgrade using VistaLINK
®
with the 570FC
Upgrading the firmware using VistaLINK
®
can be accomplished using the 570FC frame controller and
the 5782DEC.
Ensure that the 5782DEC is running the latest firmware, to check this simply right click on the card’s
address in VLPRO Client and select Version Information as shown in Figure 6-7.
Figure 6-6: VistaLINK
®
- Selecting Version Information
Once Version Information is clicked, the module will be able to be selected for upgrading.
1. Open the Hardware Tree and select the card to be upgraded.
2. Check the box beside the card to be upgraded.
3. Click the Upgrade button on the bottom right corner.
4. Click the Browse button to select the 5782DEC image file.
5. Click the Upgrade button and wait for the upload to complete. This will take approximately 5 to
10 minutes depending on network traffic. The progress bar will provide feedback on the status
of the upgrade.
6. Upon completion, the 5782DEC module will reboot automatically and return online in normal
“run” mode.
