570NAT-HW-X19
High Density Network Address Translator
Revision 1.0
Page - 39
to the route will appear in the ‘Route’ and ‘Un-route’ (if this new route will undo an old one) tables in the
‘To Perform’ menu. To apply this new route, select ‘Apply’ in the ‘To Perform’ menu.
Figure 4-27 : WebEASY
®
- Link Aggregation\Tiled View\Linking in Tiled
To unlink a port from a core, as shown below in Figure 4-28, select the tile for the respective core, the
port currently linked to that core will become highlighted in beige green (the same color the core is
highlighted). Next, with the core tile selected, select the highlighted port tile. If it is qued to be un-routed,
it will appear red (2) and appear in the ‘Un-Route’ table in the ‘To Perform’ menu.
Figure 4-28 : WebEASY
®
- Link Aggregation\Directed View\Removing Links in Tiled
This feature allows multiple processing cores to aggregate their Tx traffic to a single WAN Port.
Correspondingly, Rx traffic from that WAN port is distributed to all contributing processing cores. In the
figure above, Cores 1 & 6 are configured to aggregate their traffic to WAN Port 1.
