570NAT-HW-X19
High Density Network Address Translator
Revision 1.0
Page - 37
4.7.2. Link Aggregation – Directed
Figure 4-21 : WebEASY
®
- Link Aggregation\Directed View
The directed view allows users to assign routes in a drag-and-drop manner by selecting a core from the
‘Core’ column and dragging it to the port it is to be assigned. The example shown below in Figure 4-22
shows how to map Core 1 to Port 9 using drag-and-drop in directed view.
Figure 4-22 : WebEASY
®
- Link Aggregation\Directed View\Linking in Directed
When the new link is created, the old route to be unrouted will appear as a line in red and the old route
will appear in the ‘Un-Route’ table of the ‘To Perform’ menu, as shown below in Figure 4-23. The new
link will appear in green and will be displayed in the ‘Route’ table of the To Perform menu. Select ‘Apply’
in the ‘To Perform’ menu for route changes to be implemented.
Figure 4-23 : WebEASY
®
- Link Aggregation\Directed View\To Perform in Directed
