570NAT-HW-X19
High Density Network Address Translator
Page - 36
Revision
1.0
Figure 4-18 : WebEASY
®
- Link Aggregation\Grid View\Linking in Grid
Once this new route is selected in grid, it will be placed in the ‘To Perform’ que as shown below in Figure
4-19. Here, the old route will be shown in red on the grid, and the route to be Un-Routed will appear in
the ‘Un-Route’ menu selection. The new route will be shown in beige green on the grid, and the new
route to be routed will appear in the ‘route’ menu selection. Multiple route changes can be qued into the
‘To Perform’ menu. To apply the changes shown in the ‘To Perform’ que, select ‘Apply’.
Figure 4-19 : WebEASY
®
- Link Aggregation\Grid View\To Perform in Grid
To Un-Route without creating any new route to override, simply select the assigned core-port pair grid
space and click on it. This will turn that grid space red and the route will be added to the Un-Route que
in ‘To Perform’, select ‘Apply’ for changes to take effect.
Figure 4-20 : WebEASY
®
- Link Aggregation\Grid View\Removing Links in Grid