570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Page - 8
Revision 1.0
4.1.
SYSTEM
Figure 4-3: WebEASY
®
- System Section (Part 1 of 3)
4.1.1. System
Card Alias:
This control returns the card alias string.
4.1.2. Control Port Configuration
For Eth0 & USB0
IP Address:
This Parameter allows the user to set the IP address for control port.
Netmask:
This Parameter allows the user to set the Netmask for control port.
Gateway:
This parameter allows the user to set the Gateway for control port.
Please note the control port is only used when the 570FEC-HW-X19 is used in the S570FR.
4.1.3. Data Port Configuration
For SFPP 1 to 4
IP Address:
This parameter allows the user to set the IP address for data port.
Netmask:
This parameter allows the user to set the Netmask for data port.
Gateway:
This parameter allows the user to set the Gateway for data port.
Mac Address:
This parameter reflects the MAC Address of the data port.
