3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1
Page 27
6.2.
INPUT CONTROL
Figure 6-3: Input Control Tab
Input Stream State:
This parameter displays the Input Stream State, by default all streams are
inactive. Only after a stream has been activated traffic can run through it.
Input Port Select:
This parameter allows the user to select the physical data port (1 or 2) from which to
receive information.
SFP Port Input IP Address:
This parameter allows the user to select the input IP address or Multicast
address for both SFP ports 1 and 2.
SFP Port Input Port:
This parameter allows the user to select the input UDP port numbers for both
SFP ports 1 and 2. Range for these values can be from 1 to 65535.
Program Tuning Mode:
This parameter allows the user to select the Program Tuning Mode for the
decoder.
