Eversys LEGACY L'2c/Classic, User Manual

Page: 87 / 164

7.3. Cleaning procedures (standard)
7.3.1. Refill and visual check of the Eversys cleaning ball
TM
dispensers
IRRITANT PRODUCTS
Everclean
TM
and Eversys cleaning ball
TM
should be considered potentially dangerous.
When performing any operation on the machine, local safety regulations must be
followed. It is imperative to wear protective gloves and glasses when working with
potentially dangerous materials.
It is imperative to switch off the machine before carrying any operation on the
cleaning balls dispenser. There is a risk of minor injury with moving parts.
1. Switch off [63] at the main power switch.
2. Unlock and remove the cleaning balls lid (1).
3. Remove both Eversys cleaning ball
TM
containers (2) and clean with a clean cloth each dispenser
(3).
4. If necessary, replace new cleaning balls containers. Remove the dispensing system (4) from the
old container and replace it on the new one.
5. Replace and lock the cleaning balls lid (1).
6. Switch on [49] at the main power switch.
1
2
4
3
7.3.2. Automatic system cleaning procedure with Eversys milk cleaning
ball
TM
on Légacy machines (milk and powder unit included)
It is possible to run the complete cleaning procedure at any time. Though you must run the cleaning
when requested (if cancelled and depending on settings, it will not be possible to make a drink unless
cleaning is performed).
Care
Page 87 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.