5
Appendix A
: Repeater test matrix table
Target: End Device
Target: Gateway
Target: Level-2 Repeater
Target: Level-1 Repeater
Level-1
Repeater
To Enter
1. Set Mode switch to
'Test'
2. Trigger/Activate the
device
To Enter
1. Set Mode switch to 'Test’.
2. Press Tamper switch on
Repeater to start Beacon
Mode.
To Enter
1. Set Mode Switch on
Level-1 Repeater to 'Test'.
2. Press Tamper switch on
Level-2 Repeater to start
Beacon Mode.
N/A
Observe
Results
1. LED Signal strength
indicator on Repeater
2. Short Beeps emitted
by Repeater for signal
strength
Observe
Results
At every 5 secs:
1. LED Signal strength
indicator on Repeater
2. Long Beeps emitted by
Repeater for signal strength
3. Gateway registers a
Tamper event
Observe
Results
At every 5 secs:
1. LED Signal strength
indicator on both Repeaters.
2. Short Beeps emitted by
Level-1 Repeater for signal
strength
3. Gateway registers a
Tamper event.
To Exit
Set Mode switch back to
'Normal'.
To Exit
Set Mode switch back to
'Normal'.
To Exit
Set Level-1 Repeater Mode
switch back to 'Normal'.
Level-2
Repeater
To Enter
1. Set Mode switch to
'Test'
2. Trigger/Activate the
device
To Enter
No specific test mode.
Press Tamper switch to
send Tamper event to
Gateway.
N/A
To Enter
1. Set Mode Switch on Level-1
Repeater to 'Test'.
2. Press Tamper switch on
Level-2 Repeater to start
Beacon Mode.
Observe
Results
1. LED Signal strength
indicator on Repeater
2. Short Beeps emitted
by Repeater for signal
strength
Observe
Results
Gateway registers a
Tamper event.
Observe
Results
At every 5 secs:
1. LED Signal strength indicator
on both Repeaters.
2. Short Beeps emitted by
Level-1 Repeater for signal
strength.
3. Gateway registers a Tamper
event
To Exit
Set Mode switch back to
'Normal'.
To Exit
None
To Exit
Set Level-1 Repeater Mode
switch back to 'Normal'.