Copyright © 2016 Everspin Technologies
Revision 1.0, 2/2016
2
MR10Q010-EVAL1
Everspin Quad SPI MRAM Evaluation Board User Guide
Step 1:
Download and Install the ST-LINK/V2 Driver
Host Board
Link to Driver Download Page
NUCLEO-L476RG
Link
First, plug the SPI Evaluation board into your MCU host board, then connect the
host board to your PC using the USB cable. The MCU host board will enumerate
as a composite USB device that includes a built in debugger, storage device and
a virtual com port.
A new drive will be created on your computer with a drive name as assigned by
the host board.
Besides the ST Micro MCU host board and the Everspin MR10Q010 Quad SPI Evaluation board, you will need:
•
A computer with Internet access and a USB port.
•
A USB cable, with standard A to mini B connectors.
SETUP: MR10Q010 - EVAL1 MRAM EVALUATION BOARD
Step 2:
Plug in the Quad SPI Evaluation board and connect it to your computer via the USB
port.
