eversolo DAC-Z6, Product Manual, Page: 22 / 31

Page 20 Page 20
High Resolution DAC & Headphone Amplifi er
Input
❹ Optical/Coaxial input
Connect this device with S/PDIF devices like media player and CD player by a Optical/Coaxial
audio cable.
Please set the signal source to Optical/Coaxial.
❺ USB DAC Input
Connect the computer to the USB DAC input of this device by USB-A to USB-B cable.
Computer is the digital audio source, this device is used as a computer sound card to decode
audio signals.
Please select the signal source to �USB DAC IN�.
Notes:
*Please refer to File Download part below to download Windows driver.
*EVERSOLO DAC-Z6 is working as the audio output device when connecting with the
computer, the settings are as follows.
Windows: Download and install the driver on the computer, fi nd �Control Panel>Hardware
and Sound >Sound >Playback�, then select �EVERSOLO USB AUDIO�.
Mac: No driver is needed to be installed, fi nd �System Preferences >Sound>Output�, then
select �EVERSOLO USB AUDIO�.
*The positive and negative polarities are reversed for some audio systems, the default
positive polarity of DAC-Z6 are shown below. If you need to reverse the polarity, please set it
in the system: Settings > DAC audio > XLR Port Polarity >Reverse.
In order to reduce the possible signal interference of the RCA and XLR simultaneous output,
XLR and RCA can be output separately by setting in the menu. Higher audio indicators and
better sound quality can be obtained through separate output.
Positive Polarity Diagram Negative Polarity Diagram
+
+ -
-
GND GND