EverSewn sparrow 15, Instruction Manual

Page: 17 / 52

1
3
5
8
2
4
7 6
10 9
Winding the bobbin
1/2. Place thread and corresponding spool
holder onto spool pin.
3. Snap thread into thread guide.
4. Wind thread clockwise around bobbin
winder tension discs.
5. Thread bobbin as illustrated and place on
spindle.
6. Push bobbin winder spindle to right.
7. Hold thread end.
8. Step on foot control.
9. Release the pedal after a few turns.
Release the thread and cut as close as
possible to the bobbin (a). Press the pedal
again. Once the spool is full, it rotates
slowly. Release the pedal and cut thread (b).
10. Push bobbin winder spindle to left and
remove.
Please Note:
When the bobbin winder spindle is in "bobbin
winding" position, the machine will not sew and
the hand wheel will not turn. To start sewing,
push the bobbin winder spindle to the left
(sewing position).
15
a
b
sparrow 15