53
7-3-3
Adjusting the distance of the Y-axis belt gear
Use the screw driver to loosen the two setscrews
Push the stepping motor toward the 105-teeth gear to make
the gap smaller.
Push to another side to enlarge the gap.
Make sure the two gears gently fit together then re-tighten
the two setscrews.
7-3-4 Adjusting the distance of the X-axis belt gear
Use the screw driver to loosen the two setscrews
Push the stepping motor toward the 105-teeth gear to make
the gap smaller.
Push to another side to enlarge the gap.
Make sure the two gears gently fit together then re-tighten
the two setscrews.
