18
157
Eversense CGM User Guide
Q: I just received a new smart transmitter. How do
I unlink the old one and link the new one to my
sensor?
A: On the Main Menu, tap
Connect
. Tap and hold
the name of your old smart transmitter. Tap
OK
to
stop the app from automatically connecting with
the old smart transmitter. Follow the steps in this
User Guide for pairing the new smart transmitter
with the app and linking it to your sensor.
Calibration
Q: Will doing more than 2 fingerstick calibrations per
day affect the accuracy of the system?
A: The accuracy will not be negatively impacted if you do
more than the required 2 calibrations per day.
Q: What time should I enter on the
CALIBRATE
screen when I am notified to calibrate?
A: Enter the time you tested your blood glucose with your
meter. You must enter the blood glucose reading within
10 minutes of doing the test.
Q: Why was my calibration rejected?
A: The system will reject the calibration for the any of the
following reasons:
•
The blood glucose reading entered is less than
40 mg/dL.
•
The blood glucose reading entered is greater than
400 mg/dL.
If another calibration is needed, the system will prompt
you.
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 157
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 157
2/26/20 12:59 PM
2/26/20 12:59 PM