7. BRUSH OPERATION
As shown in Figure 1, first take out the water tank, then
take out the water trough with its brush.
As shown in Figure 2, water the top surface of the brush
until the brush is completely soaked.
As shown in Figure 3, put the water trough in position,
and then put back the water tank.
As shown in Figure 4, gently press down the part
highlighted in red with your hand to make it contact fully
with the brush.
1
2
3
4
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen T49 208 99475-0 T49 208 99475-31 [email protected] eversgmbh.de
