7700 MultiFrame Manual
7707VR-4 Quad SDI Fiber Receiver
Page-14
Revision
1.3
6.3. V
ISTA
LINK
®
CONTROLLED PARAMETERS
The following parameters can be remotely controlled through VistaLINK
®
interface.
Parameter Description
Change Password
Allows the user to change the password that is needed in
order to enable/disable video channels.
Video 1,2,3,4 Enable
Enables or disables an output video channel.
Optical Power Alarm
Threshold
Sets optical power alarm threshold.
Table 6-2: VistaLINK
®
Controlled Parameters
6.4. V
ISTA
LINK
®
TRAPS
The following traps can be remotely monitored through VistaLINK
®
interface.
Trap Description
Video 1,2,3,4 not present
Triggers when there is a loss of video signal.
Video 1,2,3,4 EDH Errors
Present
Triggers when there is an EDH error present in the video
signal.
Optical power alert
Triggers when optical power falls below the set threshold.
Optical Link Not Ok
Triggers on loss of optical link with 7707VT-4.
Table 6-3: VistaLINK
®
Traps
