7700 MultiFrame Manual
7707AT-A Multi-Channel Analog Audio Fiber Transmitter
Revision
2.3
Page - 3
2. INSTALLATION
The 7707AT-A series modules come with a companion rear plate that has analog audio connections and
an SC/PC (shown), ST/PC or FC/PC optical connector. Each version provides analog audio connections
via multi-pin removable terminal blocks. For information on mounting the rear plate and inserting the
module into the frame see the 7700FR chapter section 3. The following diagram shows rear plate options
for each 7707AT-A version:
Figure 2-1: 7707AT-A Rear Panels
2.1. OPTICAL
CONNECTIONS
FIBER OUTPUT:
There is one SC/PC (shown), ST/PC or FC/PC female connector with the optical
output of the 7707AT-A. This optical output is available in 1310nm, 1550nm, and up
to sixteen CWDM wavelengths (ITU-T G.694.2 compliant) and is compatible with
multimode fiber when connected directly to a companion 7707AR-A card.