Everlast ULTRA-ARC 205, Operator'S Manual

Page: 2 / 40

2
TABLE OF CONTENTS
Section ………………………………..…………..
Page
Letter to the Customer ………………...……………...
Everlast Contact Information ……………………...……
Safety Precautions ……………………………………
Introduction and Specifications ………………….…….
Unit Specifications ……………………….…………...
General Overview …………….…..…………………...
General Maintenance …...………...………………...…
Quick Setup Guide, TIG Torch Connections.. ……………
Stick Electrode Holder Connections... …………………..
Plasma Torch Connections ……………………………
Rear TIG and Power Connections ……………………...
Compressor and Air Dryer Connections.. ……..………...
Quick Operating Tips and Warning …….……………….
Definitions and Explanation of Features and Terms ……...
Front Panel Controls …………...……………………..
Rear Panel ………….……………………………….
Operation …………..………………………………...
S - 45 Plasma Torch and Parts Breakdown ………………
TIG Torch and Parts Breakdown. ……………………….
Troubleshooting ……………….……………………...
Point Gap Adjustment ……...…………………………
Error Codes ………………………………………….
3
4
5
9
10
11
11
13
14
15
16
17
18
19
21
22
23
34
35
36
37
38
NOTICE:
Product Specifications and features are subject to change without notice. While every attempt has been made to provide the most
accurate and current information possible at the time of publication, this manual is intended to be a general guide and not intended
to be exhaustive in its content regarding safety, welding, or the operation/maintenance of this unit. Everlast Power Equipment INC.
does not guarantee the accuracy, completeness, authority or authenticity of the information contained within this manual. The
owner of this product assumes all liability for its use and maintenance. Everlast Power Equipment INC. does not warrant this prod-
uct or this document for fitness for any particular purpose, for performance/accuracy or for suitability of application. Furthermore,
Everlast Power Equipment INC. does not accept liability for injury or damages, consequential or incidental, resulting from the use
of this product or resulting from the content found in this document or accept claims by a third party of such liability.