Everlast DUMBBELL PRO, User Manual

Page: 16 / 17

The parts mentioned above are all the parts you need to assemble this equipment. Before you start to
assemble, please check the hardware packing to make sure all parts are included. Basic tools, such as
spanners will be required for assembly.
Part Description Q’ty Part Description Q’ty
1 Rear Bottom Tube 1 17 Iron Bushing (ø12 mm) 2
2 Front Bottom Tube 1 18 Plastic Handle (M10) 1
3 Main Frame 1 19 Knob (M10) 1
4 Back Cushion Tube 1 20 Pin (ø10 x 110 mm) 1
5 Seat Cushion Tube 2 21 Foam 2
6 Back Cushion Support 1 22 Washer (ø8 mm) 8
7 Seat Cushion Support 1 23 Washer (ø10 mm) 12
8 Foam Tube 1 24 Washer (ø12 mm) 4
9 Seat Cushion 1 25 Lock Nut (M10) 6
10 Back Cushion 1 26 Lock Nut (M12) 1
11 Round End Cap (ø25 mm) 2 27 Hex Bolt (M8 x 20 mm) 4
12 Square End Cap (
xw3
25 mm) 4 28 Hex Bolt (M8 x 40 mm) 4
13 Plastic Bumper (ø25 mm) 1 29 Hex Bolt (M10 x 55 mm) 4
14 Oval End Cap (30 x 60 mm) 1 30 Hex Bolt (M10 x 105 mm) 1
15 Oval End Cap (40 x 80 mm) 1 31 Hex Bolt (M10 x 175 mm) 1
16 Out Oval End Cap (40 x 80 mm) 4 32 Hex Bolt (M12 x 175 mm) 1
16
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlast.com
PARTS LIST