1-800-476-7366 | [email protected] | WWW.EVERLASTCLIMBING.COM
© 2013 EVERLAST CLIMBING, A PLAYCORE COMPANY
K E R S P L A S H
®
P O O L C L I M B I N G W A L L I N S TA L L AT I O N I N S T R U C T I O N S
6
ATTACHING THE CLIMBING PANELS TO THE FRAME
NOTE: If your environment is humid, we recommend applying an extra coat of Spectra Shield to
the frame. To order, contact Spectrum Aquatics (Part Number 202050-00), at 800.791.8056.
Lay the stainless steel frame on its back with the spine towards the ground.
Place the panels on top of the frame and drop in button head screws to
hold the panels in place, but do not tighten. For ease of installation and to
accommodate manufacturing and temperature variances, each climbing
panel has 6 mounting slots that allow for adjustment when attaching the
panels to the frame. For the bottom panel, center the fasteners in each of
these slots.
Attach the climbing panel to the climbing frame as shown
below using the following hardware:
6 - 3/8” x 1 ¼” Button Head Socket Screw
6 - 3/8” Flat Washers
6 - 3/8” Nylock Nuts
Affix the 2’ x 4’ safety panel to the top of the climbing frame using:
4 - 3/8” x 1 ¼” Button Head Socket Screws
4 - 3/8” Flat Washers
4 - 3/8” Nylock Nuts