3
CHAPTER 4
General Safety Precautions
End User Obligations
The end user must immediately inform the
manufacturer of any safety system defect and/or any
malfunction he or she is aware of.
It is strictly forbidden for the end user and/or any third
parties (excluding duly authorized service personnel of
the manufacturer) to make modifications of any kind to
the appliance, its functions or to this technical
publication. In case of malfunctions or defects due to
the non-observance of the above, the manufacturing
compnay cannot be held responsible for the
consequences.
End User Obligations
1. Never touch the metal parts of the machine with wet
or damp hands;
2. Do not pull on the cord to disconnect the plug from the
current outlet.
3. Unqualified or untrained personnel are not allowed
to use the machine without supervision.
4. Electrical safety of the machine is ensured by a
properly grounded electrical circuit, which consists of a
grounded cord and cord cap and a correct electrical outlet.
5. The use of an extension cord is not allowed and may
result in injury or death.
6. In the event of damage to the cord, the end user of
the appliance must not attempt to replace the part. This
must be performed by a qualified service personnel.
7. Always switch off and disconnect the appliance from
the power supply before begnning any general cleaning
or maintenance operation.
8. Clean appliance coating, panels and controls using
soft and dry cloths, or cloths slightly soaked in mild
detergent solution.
2. Possible conditions causing electronic controls to fail
include incorrect electrical supply, environmental
elements, storms, lightning, water damage, could cause
damages which cannot be attributed to the
manufacturing company and to the manufacture
of the product itself.
3. During the warranty period, for any defect in
workmanship and material, all parts and labor will be
covered. All warranty claims must be submitted to and
conform by all statements and policies of the
Everidge 24/7 Warranty Service.
4. During the warranty period, we will pay, not to
exceed, one (1) hour travel and fifty (50) miles travel. All
warranty service will be performed by an authorized
service center certified by the manufacturer. All parts
replaced under warranty must be returned to the
manufacturer for inspection before any warranty is
paid.
5. Any components considered defective (door gasket,
electronic control, etc.) and is determined to be caused
by misuse or abuse during the warranty period will not
be considered under warranty. The end user will be
responsible for any repairs or parts for repairs.
6. Equipment modified in any manner from original
model, substitution of parts other than factory
authorized parts, removal of any parts including legs, or
addition of any parts.
7. Any losses or damage resulting from malfunction,
including loss of product, food product, revenue, or
consequential or incidental damages of any kind.
8. Equipment damage caused by accident, shipping,
improper installation or alteration.
9. Any injury caused by failure to abide by these written
instructions, improper installation, improper electrical
connections, alteration to equipment will be the
responsibility of the owner.
10. This warranty is exclusive and is in lieu of all other
warranties, express or implied, including the implied
warranties of merchantability and fitness for a
particular purpose. In no event shall PrepRite be
liable for loss of use, loss of revenue or profit, or loss of
product, or for any indirect, special, incidental, or
consequential damages. No person except an officer of
PrepRite is authorized to modify this warranty or to
incur on behalf of PrepRite any other obligation or
liability in connection with PrepRite equipment.
Summary of Contents for PREPRITE PAD7 Series
Page 1: ...PPT481C PPT602C PPT843C PAD7 Series Refrigerated Prep Tables Operation and Care Manual For...
Page 2: ......
Page 17: ...15 PAD7 Exploded Views 15...
Page 19: ......