EverFocus PARAGON FHD 16x4 User Manual Download Page 144

Page: 144 / 168

PARAGON FHD 16x4

136

7.3

Menu Bar

No. Name

Description

Live

Click to display the live view window.

Express

Click to configure the global express settings for all cameras. Please refer
to

6.1 Express.

Camera

Click to configure the camera settings. Please refer to

6.2 Camera.

Record

Click to configure the record settings. Please refer to

6.3 Record.

Event

Click to configure the alarm / event settings. Please refer to

6.4 Event

Disk

Click to display the HDD information. Please refer to

6.5 Hard Disk.

Display
Setting

Click to configure the display settings for displaying the camera
information on the camera live view. Please refer to

6.6 Display Settings.

Network

Click to configure the network settings. Please refer to

6.7 Network

Settings.

Schedule

Click to configure the recording schedule. Please refer to

6.8 Schedule

Setting.

System
Setting

Click to configure the DVR time / user privilege / IO control / UI language
or upgrading firmware and etc. Please refer to

6.9 System Setting.

System
Information

Displays the system information. Please refer to

6.10 Information.

12 Copy

Click to archive the recordings from the DVR to the client PC. Please refer
to

4.7 Archiving the Recordings or Log Data to the USB or DVD.

13 Search

Search the recordings for remote playback. Please refer to

7.4 Remote

Playback

14 PTZ

Click to control the connected PTZ cameras. Please refer to

4.1 PTZ

Summary of Contents for PARAGON FHD 16x4









































































































































































Search results

Summary of Contents for PARAGON FHD 16x4

Reviews:

Brands by name

Popular brands

EverFocus PARAGON FHD 16x4, User Manual

Search results

Summary of Contents for PARAGON FHD 16x4

Reviews:

Brands by name

Popular brands