10
4. CAMERA SETUP
This camera utilizes
an On Screen Display
(OSD) user setup
menu that can be
navigated by a control
stick marked by (3 )
in the photo on the
right) that is located
next to the lens at the
front of the camera
housing. To access
this control stick, (1)
loosen the screws and
remove the Sunshield
and the Lock tab
.
(2) Twist the front cover carefully counterclockwise until the front cover unscrews
from the camera housing.
4.1 CONTROL STICK MOVEMENTS
To configure options on the OSD setup menu, move the control stick to do the actions described
below.
①
ENTER / CONFIRM
Press this button
(by pressing straight down on the stick)
to display the OSD’s main menu on the
monitor that you have connected directly or indirectly to the camera’s video connector. Also
press this button to confirm changes and to open the submenus when they’re available and
selected. (Menu items with a “
<
┘
” symbol at the end contain submenus. For adjusting submenu
items, select the desired menu item with the
and
buttons and press the
ENTER
button to
open the desired submenu. Use the
and
buttons to toggle between value options.)
②
SCROLL RIGHT
Press this button (by pressing the control stick to the right) to move the on-screen cursor to the
right to select items or to adjust the level/intensity of a selected function. The level/intensity
increases when this button is pressed.
③
SCROLL LEFT
Press this button (by pressing the control stick to the left) to move the cursor to the left to select
items or to adjust the level/intensity of a selected function. The level/intensity decreases when
this button is pressed.
Remove the Lock tab
and the Sunshield
Twist the front cover
carefully
The control stick
