EZH5102 1080p Mini IR Bullet Camera
9
X, Y-POS, SIZ:
Enter the submenu to set up the position or size of the privacy mask zone.
COLOR:
Press to select a color for the selected privacy mask zone.
TRANS:
Press to select the transparency of mask zone.
SHADING
Turn it on to offset diminished light transmission through lens periphery for uniform image
illumination.
DAY&NIGHT
The options include MODE, AGC THRS, DELAY. A submenu can be entered if you select MODE.
MODE – Use the
and
buttons to select AUTO, COLOR, EXT and B&W. Select EXT
(Exterior) to switch the camera to the Color / B&W mode controlled by the Light Sensor.
Switches to a B&W feed in low light conditions and then switches back to a Color feed in
the daytime.
AGC THRS –Use the
and
buttons to select the AGC Threshold from 0 to 20.
DELAY – Set up the delay time in 0,5,10 and 30 seconds for the camera to switch between
Day and Night.
HLMASK
Turn it on to select the level and color of the masking effect. You can adjust the level to control
the mask range. The higher the level, the brighter the camera will detect to apply the mask.
CTB (Contrast Boost)
Turn it on to deliver properly exposed images despite bright light sources, deep shadows and /
or unbalanced lighting in the same scene.
GAMMA
Use the
and
buttons to increase or decrease the GAMMA from 0.45 to 0.75.
