29
SELECT mode.
AREA DISPLAY
Select “ON” to use the area selected in the AREA SELECT. Select “OFF”
to disable this function.
LEFT/RIGHT
Set the coordinate of the horizontal axis 6~98.
WIDTH
Set the size of horizontal area 0~93.
TOP/BOTTOM
Set the coordinate of the vertical axis 0~60.
HEIGHT
Set the size of vertical area 0~61.
COLOR
Set area color. It is selectable from 0 to 15.
RETURN
Press “RET” to save all settings in PRIVACY menu and return to the
previous menu. Press “END” to save all the menu settings and exit.
3.3.7.11 SYNC
There are two SYNCHRONIZATION modes INTERNAL and LINE-LOCK. In LINE-LOCK mode,
the video signal is synchronized to the frequency of the incoming AC power. The Line-Lock
synchronization can only be used when the supply power is 24VAC 60Hz (NTSC models) or
50Hz (PAL models).
INT
Internal synchronization
L/L
Line-lock synchronization (only for 24 VAC)
3.3.7.12 LANGUAGE
Select OSD language. EZ610/630 camera supports multiple languages including English,
Japanese, Traditional Chinese and Simplified Chinese.
3.3.7.13 RETURN
Press “RET” to save all settings in the SPECIAL menu and return to the previous menu.
Press “END” to save all the menu settings and exit.
3.3.8
ADJUST
Adjust sharpness, Blue and Red level in this section.
3.3.8.1 SHARPNESS
The contour of the video image becomes cleaner and more easily distinguished as the level of
SHARPNESS increases. If the level is set too high, it may affect the video image and cause
noise. The available range of level is 0~31.
3.3.8.2 BLUE
Adjust image’s blue level. The available range of level is 0~100.