19
Vlan Stacking Setting
After configuring port members for stacking VLANs on the switch, the ports connected to a service provider
network need to be enabled as doubled tagged ports. Also the Tag Protocol Identifier (TPID) value must be set
for the doubled-tagged ports to identify 802.1Q tagged frames.
Web Smart switch interface
To manage stacking VLAN port settings,
1.
Click Configuration, VLAN Stacking, S-VLAN Setting.
2.
Specify the Tag Protocol ID number.
3.
Set the stacking PVID for service provider ports and configure them as “Enabled.”
4.
Click Apply.
Figure 15: VLAN Stacking Setting
Summary of Contents for ESM316T002R
Page 7: ...7 Figure 3 Web Based Management Interface ...
Page 60: ...60 ...
