EQH5202 Box Camera
10
SENS-UP
SENS-UP is used to maintain a vivid screen image by automatically boosting low light levels.
This function is only available when you set up the
Shutter
to be AUTO or 1/30. The value is
between x2 ~ X60. Note that SENS-UP value with x8 or higher is
NOT
recommended without
careful consideration of application conditions.
Brightness
Use the
and
buttons to increase or decrease the screen brightness from 0 to 100.
ETR ( EverFocus Tone Reproduction)
ETR is an advanced form of electronic wide dynamic range expansion used to deliver properly
exposed images despite bright light sources, deep shadows and/or unbalanced lighting in the
same scene. The options include: Off, Low, Middle and High.
EFECT (EverFocus Enhanced Contrast Technology)
EFECT analyzes the distribution of luminance across the image and processes the signal to
improve contrast and increase image clarity, by reducing effects due to dispersion of light
caused by fog, smoke and similar conditions. The options include: Off, Low, Middle and High.
Backlight
Adjust the backlight values. The options include: Off, BLC and HSBLC.
•
BLC (Backlight Compensation):
GAIN
– Select from low to high. Video gain is adjusted automatically to correct the
exposure of subjects that are in front of a bright light source. Select the AREA before
setting up the GAIN value.
AREA
–Configure an area for setting up the GAIN value. Enter the Area setup page, a
“POSITION” sign displayed on the screen. Use the direction buttons to move the area
to the desired position. Press the
Enter / Confirm
button to confirm the position, a
“SIZE” sign displayed on the screen. Use the direction buttons to adjust the size for the
area. Press the
Enter / Confirm
button to confirm the size, the
Return / Again
buttons
displayed on the screen. Select
Again
to set up the position and size for the area again
or click
Return
to return to the BLC setup page.
Default
– Return to the default value.
