![EverFocus ENR 400 Installation Manual Download Page 60](http://html1.mh-extra.com/html/everfocus/enr-400/enr-400_installation-manual_2443250060.webp)
ENR 400 Installation Manual
60 of 81
ENR400_ma_inst_en_rev01
Define Object Size
Define the estimated object size by drawing in the video window.
If necessary, the object size has to be adjusted again after running
simulation (in case of no safe detection).
Options
1 Way Counting:
Application will count movements from REGION 1 to
REGION 2 only.
2 Way Counting:
Application counts movements in both directions
Sensitivity:
Adjust the detection sensitivity depending on the
scenery. Use the simulation mode for test. This
setting is also related to OBJECT SIZE setting.
Runtime
Options for live - display:
Show Counting
Result
The number of counted movements is shown as overlay in the live
view of the camera.
Show Object Bounding
Box
Counted objects are marked in live view of the camera.
Reset every....
Time interval for resetting the counting result display in the camera.
Start / Stop Simulation
After setting the parameters the settings can be tested in simulation
mode. Counting results are shown under RESULT in lower right
corner.