EMW930
3
4.
Cable Description
12VDC Power Cable
BNC Cable
OSD Joystick
You can use the OSD Joystick to switch between HD and 960H resolution (see image below).
NTSC / PAL
Press Left for 5 Seconds: Switch to 960H resolution
Press Right for 5 Seconds: Switch to HD resolution
Press Down for 5 Seconds: Switch between NTSC and PAL
5.
Installation
1.
Paste the supplied
Mounting Template
onto a desired location of the surface. Drill the four red
cross marks (3.7mm diameter if plastic anchors are not used) for the mounting screws. If you
wish to run the cable into the wall, drill another hole marked as a circle below.
Drill this hole if you want to
run the cable into the wall
2.
Push the four supplied four
Plastic Anchors
into the four holes on the surface.
