EverFocus Elite 2 NVR8004X, Quick Installation Manual, Page: 11 / 21

Elite 2-NVR8004X-20Ch. NVR
6
2. Installation
2.1 Hard Disk Drive Installation
1. Your HDD should be preinstalled when you receive the NVR.
Note:
To replace new hard disks:
1. If RAID function is configured, assign this RAID disk to a single group first (
see To create a
new group in
4.3.2 Storage Device Management
of the Genie XMS software manual in
the CD
)
, and then replace the new hard disk.
2.
If RAID function is not configured, assign all the hard disks to a single group first (
see To
create a new group in
4.3.2 Storage Device Management
of the Genie XMS software
manual in the CD
)
, and then replace the new hard disk.
2.1.1 Hard Disk Compatibility List
Please use the hard disk models recommended in the list below to ensure your hard disks will
be compatible.
SATA Hard Disk Model Capacity
Seagate
SV35.5 SATA2 ST3500410SV 500GB
SV35.5 SATA2 ST31000525SV 1TB
SV35.5 SATA3 ST3500411SV 500GB
SV35.5 SATA3ST31000526SV 1TB
SV35 SATA3ST2000VX002 2TB
Constellation ES.3 SATA3
ST4000NM0033
4TB
Constellation CS SED SATA3
ST3000NC000
3TB
CE-Video SATA3 / ST3500312CS 500GB
CE-Video SATA3 / ST1000VM002 1TB
CE-Video SATA3 / ST2000VM003 2TB
Chapter
2
Note: If using two or more hard disks, please choose the hard disks with the same
capacity.