3.
Mounting the base.
Attach the base to the wall or ceiling; fix the base by the 4 setscrews
provided in the accessory pack. The dome weight is approximately 3.7 lbs,
please make sure if the mounting is strong enough to support the weight.
If not, please reinforce the mounting according to the environment.
Note:
The diameter of the screw hole is 4.7mm.
Caution:
To prevent moisture leaking into the housing, apply an
appropriate gasket or sealant around the conduit connection.
Conduit plug setscrew
Side conduit entry
Back conduit entry
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
Figure 4
The camera comes with a conduit plug
pre-installed in the PF 1/2 conduit entry
on the side. The screw can be removed
and installed in the back conduit entry.
Loosen the conduit plug setscrew (as
shown in Figure 5) before removing the
conduit plug.
Side conduit entry (PF1/2)
Figure 5
Back conduit entry (PF1/2)
Conduit plug
5
