EverFocus EDR410H, Insruction Manual

Page: 18 / 134

10
1. Current date: The current date which is set in the TIME/DATE SETUP MENU .
2. Record status: It shows REC and recording hard disk number.
“ REC ” , it shows when machine is recording.
“ R01 ”, the recording hard disk number. There is only one hard disk available in this model, so it
always shows R01 when recording.
3. Event: The last happened event.
4. Current time: The current time which is set in the TIME/DATE SETUP MENU.
5. HDD/Fan status: “No Disk” , it shows when no disk is installed or detected.
“No Fan” , it shows when cooling fan stops working.
5
Record status bar: The record status bar appears when you enable a status bar on the
screen (Check DISPLAY ). There are three parts which are current date, record status (%
of space used for recording), and current time.
Current Date Record Status Event
Current Time
HDD/FAN
Status
Play Date Play Status Play Time
1. Play date: The play date in which the video is recorded.
2. Play status: It shows PAUSE, play speed and reverse play speed.
“
PAUSE ”, when the video play is paused.
“
> ” means normal play speed;
“
< ” means normal reverse play speed;
“ >> x N ” means N times fast play speed;
“
<< x N ” means N times fast reverse play speed.
3. Play time: The play time at which the video is recorded. The time format depends on the time format setting in
the TIME/DATE SETUP MENU .
3
4
Select sign: You can assign a camera to a display by pressing SELECT key in life mode.
Dial Jog to move the select sign to the display you would like to change camera, and then
press FULL + channel key to relocate the camera.
Play status bar: The play status bar appears in play back mode if you enable a status bar
on the screen (Check DISPLAY ). Three parts which are play date, play time, and play
status are shown in the play status bar.