5
○
1
Press channel key (
CH1~CH8
) / (
CH1~CH4
) to display that channel in full screen view.
○
2
Press channel key again for 2x electronic zoom. Zoom screen can be moved through arrow keys.
Pressing the channel key again switches the electronic zoom off and return to full screen view of
that channel.
10) View:
Press this key to switch between 4x, PiP (Picture In Picture), full screen and 9x.
Note:
○
1
PIP display is not available in playback mode.
○
2
This key is also used for BNC and VGA selection at the initial setup.
11) SEQ:
Press this key to enter the auto sequential switching mode. The sequence dwell time can be
set in “Display Setting” tab of the Menu. For more detail about SEQ, please see “Section
4.9.2 Display Setting-Main M/T SEQ”
12) Display:
Press this key to switch display of channels and status bar.
13)
Search:
Press this key to enter Search Menu. For more detail about the
Search function, please
see “Section 3.12 Search”.
14) Copy:
Press this key to enter
Copy Menu
. For more detail about Copy function, please see
“Section 3.13
Copy”.
15) Zoom:
In full screen mode, 2x and 4x electronic zoom. Zoom screen can be moved through arrow
keys. Pressing the Menu/ESC key again switches the electronic zoom off.
16) Enter/ Arrow keys:
Instead of or in combination with
a mouse, you can use these keys to change
the Menu settings.
17) Power LED:
This LED ON indicates
Power
on.
18) Record
LED
: This LED ON indicates
Record
active.
19)
Alarm LED:
This LED ON indicates
Alarm
active.
20)
Network LED:
This LED ON indicates
Network
active.
